Systea GmbH

Safety and energy efficiency - SYSTEA substructure systems offer more than just secure support.

Thanks to our contact with the industry, we know exactly what architects, planners and façade installers require and incorporate this knowledge into our solutions. In addition to technical performance, our systems are characterized by safe, efficient and economical installation.

The wall brackets play a key role in the specification of every VHF. Our numerous profile systems can be combined with wall brackets made of aluminum, stainless steel or glass fiber-reinforced polyamide to create a wide variety of solutions and thus meet all requirements in terms of design, fire protection and energy efficiency.

Aluminum L wall brackets :

The non-combustible aluminum wall brackets in alloy EN AW-6063 T66 have a medium thermal conductivity (class D to H). They are available in depths from 40 mm to 320 mm and are used for fixing to concrete/masonry or wood/metal studs.

Aluminum U-wall brackets :

the non-combustible aluminum wall brackets in alloy EN AW-6063 T66 have a medium thermal conductivity (class B to F). They are available in depths from 40 mm to 180 mm and are used for fixing to concrete/masonry or wood/metal studs.

Stainless steel L wall brackets:

The non-combustible stainless steel wall brackets in alloy EN 10088-2; 1.4162 have low thermal conductivity (class A+ to B). They are available in depths from 120 mm to 400 mm and can be used for fixing to concrete/masonry or wood/metal studs. Suitable for passive house construction.

Stainless steel U-wall brackets :

The non-combustible stainless steel wall brackets in alloy EN 10088-2; 1.4162 have low thermal conductivity (class A+ to B). They are available in depths from 60 mm to 300 mm and are used for fixing to concrete/masonry or wood/metal stud frames. Suitable for passive house construction.

TEKOFIX wall bracket:

The flame-retardant TEKOFIX wall bracket is made of PA66 glass fiber-reinforced plastic, which enables very low thermal conductivity (class A+ to A). The wall bracket is available in depths from 100 mm to 350 mm and is used for fixing to concrete/masonry or metal studs. Suitable for passive house construction.